800-379-8493 • 410-863-1700 • sales@dcscientific.com

Brix Thermo-hydrometers – Draft Survey – Cases

Brix Thermohydrometers

Percent sucrose by weight @ 20C. Popular for use in production and quality control of the production of carbonated beverages and beers. Calibration at other temperatures is available on special request. The thermometer scale of these units are from 0 to 50 degrees Celsius in 1 degree subdivisions. A correction scale for conversion of readings to 20C is printed opposite the temperature scale.

Uncalibrated
Cat No Brix Range Div Length Temp Range
500-502 -1 to 11 0.1 385mm 0 to 50C
500-510 9 to 21 0.1 385mm 0 to 50C
500-518 19 to 31 0.1 385mm 0 to 50C
500-526 29 to 41 0.1 385mm 0 to 50C
500-532 39 to 51 0.1 385mm 0 to 50C
500-534 49 to 61 0.1 385mm 0 to 50C
500-536 59 to 71 0.1 385mm 0 to 50C
500-540 69 to 81 0.1 385mm 0 to 50C
500-542 79 to 91 0.1 385mm 0 to 50C
Calibrated
Cat No Brix Range Div Length Temp Range Certified at
500-502-C -1 to 11 0.1 385mm 0 to 50C 3 test points
500-510-C 9 to 21 0.1 385mm 0 to 50C 3 test points
500-518-C 19 to 31 0.1 385mm 0 to 50C 3 test points
500-526-C 29 to 41 0.1 385mm 0 to 50C 3 test points
500-532-C 39 to 51 0.1 385mm 0 to 50C 3 test points
500-534-C 49 to 61 0.1 385mm 0 to 50C 3 test points
500-536-C 59 to 71 0.1 385mm 0 to 50C 3 test points
500-540-C 69 to 81 0.1 385mm 0 to 50C 3 test points
500-542-C 79 to 91 0.1 385mm 0 to 50C 3 test points

Draft Survey Hydrometer

For determining the density of seawater or fresh water. Graduated in the density scale kilograms per liter (Kg/L) in air (apparent density) @ 15°C. Supplied with factory certificate of accuracy.

Cat No Density, Kg/L Div Length
Draft survey .990/1.040 0.0005 330mm

10 Place Hydrometer Case

A secure, convenient way to organize and protect your certified hydrometers. This case is fabricated from wood, with leatherette covered exterior and velvet lined interior. Holds ten hydrometers of up to 15” (385mm) length.

Cat No. Inside Length
300-012 15-7/8”

3 Place Carrying Case For Hydrometers

For carrying three 15 inch hydrometers. Case is made of plastic with body section felt lined. Ends of case have felt cushions. Its outstanding feature is the spring loaded hinge system that holds the lid open at any angle greater than 30 degrees, but will keep the case closed at any angle less than 30 degrees and under spring pressure. Easy to open, lid can be folded back 180 degrees. The grooves built into the body make it easy to pick up. This eliminates the need of a separate handle.

Cat No. Inside Length
300-010 15”

Back to Top